Camescope
Sony DSR-570WSP 16.9/4.3
The
new DSP TruEye processing and the 16:9 PowerHAD CCD brings image quality
to a new level of reference.
The DSR-570WSP
now also allows studio operation via CCU control - A standard Sony 26-pin
CCU interface supports connection to either a Sony CCU-M5AP, for in-studio
use, or any portable VTR, for high-quality EFP applications in the field.
Power
HAD WS™ CCD
The DSR-570WSP is equipped with three 2/3-inch Power HAD WS IT CCDs with
a high density of 570,000 pixels. Since the CCDs are originally designed
for the 16:9 aspect ratio, high quality images can be obtained in the
16:9 mode with virtually no image loss. With a high sensitivity of F11
(at 2000 lux, 3200 K), a remarkable signal-to-noise ratio of 61 dB and
a low vertical smear level of -120 dB are achieved.
Advanced
Encoding Circuit
The DSR-570WSP performs digital-to-analogue encoding in a wider signal
bandwidth than the DSR-500WSP. This contributes to the high horizontal
resolution of 850 TV lines (4:3 mode) and 800 TV lines (16:9 mode).
Hyper
Gain (42 dB)
Hyper Gain is a useful function that allows shooting in the dark by
boosting the electric gain to 36 dB. Using the viewfinder menu system,
the gain level of Hyper Gain can be set to a maximum of 42 dB (DSR-570WSP
only). This allows shooting in as low as 0.25 lx. Simply flipping the
HYPER GAIN switch turns on this function.
Camera
Setup Files
When the SETUP switch is set to FILE position, a total of eight Camera
Setup Files can be viewed via the VF (View-finder) Menu system. Five
files are factory preset to match the most common lighting conditions,
including STANDARD, HIGH SATURATION, and FLUORESCENT. An additional
three User Files allow the operator to customise the camera parameters
to particular shooting situations. With the SetupNavi™ function,
the User Files and Factory Preset Files can also be stored to the VAUX
portion of a DVCAM tape
Digital
Output with i.LINK Interface
The DSR-570WSP adopts a 6-pin i.LINK interface for digital signal output.
This enables a back-up recording onto DV and DVCAM VTRs with just one
i.LINK cable. The i.LINK cable carries digital video/audio signals and
control signals simultaneously. For instance, when the DSR-570WSP is
connected to the Sony DVCAM Studio VTR, simple cut editing can be performed
without signal deterioration.
Black
Stretch and Compress
Contrast in the black area of an image can be easily adjusted using
the Black Stretch/Compress control function. Black Stretch emphasises
contrast in dark areas, while Black Compress enhances or deepens darkness.
Freeze
Mix Function
The Freeze Mix function superimposes a previously recorded image on
the view-finder, allowing the operator to easily frame or reposition
a subject when a shot must be taken in the same framework as a previous
take. Combined with the SetupLog™ function, a retake is a breeze.
Useful
Features for Recording Operation
The DSR-570WSP has a variety of features to make recording easy :
- 26-pin VTR interface to feed live camera output signals to an external
recorder
- 26-pin for studio operation control
- Pool Feed operation - Optional DSBK-501 Analogue Composite Input Board
allows the camcorder to serve as a VTR
- Edit Search function for easy access to the edit point
- SetupLog - Automatic recording of camera setting data for each shot
onto the DVCAM tape
CCU Control
Capability
- 300m with CCZ-A cable (26-pin) (150m for Return Video and Genlock)
- Two composite outputs – one Y/C and one component output (selectable
from Y/R-Y/B-Y and R/G/B)
- Control functions:
IRIS (auto/manual), White Balance (auto/manual/preset), Black Balance
(auto/manual/preset), Gain Select (low/mid/high), R/B Gain, R/B Pedestal,
Master Pedestal, Sub-carrier Phase, Horizontal Phase, Output Mode (color
bar/camera), Knee Point (auto/manual/preset), Detail Level, Tally/Intercom,
Shutter Speed Selection, Clear Scan
- Video light power supplied from the CCU-M5A for applications such as
on-air interviews.
Video
Light Connector
Optional light equipment can be directly attached to the DSR-570WSP
and powered from the video light connector. With the LIGHT switch located
on the front-right side of the camcorder, it can be turned on manually
or synchronised with the REC start function of the DSR-570WSP.
1.5-inch
black-and-white viewfinder (DXF-801CE)
The DSR-570P comes with the same 1.5-inch black-and-white CRT viewfinder
(DXR-801CE) that was originally designed for the DSR-500WSP. This lightweight
viewfinder, with its high resolution, lets you focus manually to optimise
picture clarity, and includes inovative features such as a dedicated
light to illuminate the Iris ring area of the lens for operation in
dark situation (high / low / off).
test
Artno 2.0
: Déc 2k+4
Camrecorder Series DSR
